
Wall-Mounted Bathroom Heater 1500W with Remote
- 1500 W Two heat settings: 750 W or 1500 W
- 1–12 h Timer, then it switches itself off
- 16 ft Remote range (13–16 ft), from the doorway
- 71 in Minimum mounting height, well off the floor
Warm before you step in
Switch it on from the doorway with the remote and the bathroom warms up while the water runs.
Frost outside, warm inside
Pick 750 W or 1500 W and a timer from 1 to 12 hours. It switches itself off.
Off the floor, out of the way
Two screws hold it high on the wall, clear of the floor and the tub.
Why it works
Warm Bathroom, No Cord On The Floor
You get out of the shower and the floor heater you've been using is sitting right there in the splash zone, cord and all. It works, but you're always a little careful around it. This wall heater solves that by living on the wall instead — above the water, out of the way, exactly where a bathroom heater should be.
It screws to the wall with two holes 6 inches apart, high above the splash zone. Once it's up, you run it from the remote: pick 750W to take the morning chill off or 1500W when you want it fast, and set a timer from 1 to 12 hours so it shuts off on its own.
It's made for one room and one use: wall-mounted, indoors, kept well clear of the tub or shower. The panel locks with a 3-second hold so it won't get bumped into a different setting, and it cuts its own power if it runs too hot.
Up and running in minutes
-
01
Mount it to the wall at least 71 inches off the floor, using two screws 6 inches apart (screws included).
-
02
Plug it into a dedicated 15A outlet, keeping it at least 20 inches from side walls.
-
03
Use the remote (up to 16 ft away) to pick 750W or 1500W and set a timer from 1 to 12 hours.
Questions before you buy
Will this actually fit in my bathroom?
It's 13 x 10.24 x 3.94 inches and mounts on the wall, not the floor. As long as you have wall space at least 71 inches up and 20 inches from side walls, away from the tub or shower, it'll fit.
How does it mount?
Two screws in the wall, 6 inches apart, at least 71 inches off the floor and 20 inches from side walls. The screws are included.
Is it rated for a wet room like a bathroom?
It's ETL Listed to UL 1278 and CSA C22.2 No. 46, the safety standards for this type of wall heater, and it's meant to be installed out of reach of the tub or shower, not inside the splash zone.
Can I put it on the floor instead?
No, it's built for wall mounting only — it's not designed or rated to sit on the floor.
What if I forget to turn it off?
Set the timer for anywhere from 1 to 12 hours and it switches itself off automatically. It also has its own overheat shutoff if the inside gets too hot.
Warm Bathroom, No Cord On The Floor
Heat where you actually stand, not the whole room
Warm Up My Bathroom